2003 PIPER PA-28R-201
N130T is a 2003 PIPER PA-28R-201 registered to LYNCH MACHINING LLC in NORTH VERNON, IN. Its FAA registration status is Valid. It has 2 NTSB accident records on file. 1 Airworthiness Directive may apply.
The PIPER PA-28R-201 is registered with the FAA under N-number N130T. This airframe was manufactured in 2003. Its manufacturer serial number is 2844104. The aircraft was issued its airworthiness certificate on 2003-10-15. The current registered owner is LYNCH MACHINING LLC, based in NORTH VERNON, IN. Registration data is sourced from the FAA Releasable Aircraft Database and refreshed weekly.
LONGMONT, CO, USA
Accident — MARCY KITFOX IV (NTSB DEN93LA007)
SANTA ROSA, NM, USA
Accident — BEECH A36 (NTSB DEN85FA200)
Severity reflects injuries to people involved, not damage to the aircraft. A “no injuries” accident can still involve significant aircraft damage.
N130T has been involved in 2 NTSB accidents since 1982. Each record above includes the date, location, severity, and NTSB summary. Buyers should review the full accident narratives and verify repairs in the aircraft's logbooks before purchase.
Airworthiness Directives; The New Piper Aircraft, Inc., Models PA-28-161, PA-28-181, PA-28R-201, PA-32R-301 (HP), PA-32R-301T, PA-32-301FT, PA-32-301XTC, PA-34-220T, PA-44-180, PA-46-350P, and PA-46-500TP Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The New Piper Aircraft, Inc. (Piper), Models PA-28-161, PA-28- 181, PA-28R-201, PA-32R-301 (HP), PA-32R-301T, PA-32-301FT, PA-32- 301XTC, PA-34-220T, PA-44-180, PA-46-350P, and PA-46-500TP airplanes. This AD requires you to inspect the control wheel attaching hardware for proper installation, replace if required, add Loctite thread- locking compound to the screw installation, and install a retainer clip to the control wheel attachment. This AD is the result of inadequate control wheel attachment design. The screw used to attach the control wheel to the control column is too short in some installations, and the nut-plate does not have adequate locking features. In addition, the screw is installed from the bottom of the control wheel and will depart quickly after thread disengagement. We are issuing this AD to detect and correct inadequate control wheel attachment design features, which could result in loss of control of the ailerons and elevator. This failure could lead to loss of control of the aircraft.
Airworthiness Directives (ADs) are FAA-mandated safety directives that apply to specific aircraft, engines, or components. N130T may be affected by 1 directive. All applicable ADs must be complied with for the aircraft to remain legally airworthy. Buyers should verify AD compliance in the aircraft's logbooks before purchase.
Full accident narratives, all Airworthiness Directives, ownership chain, and a downloadable PDF.
View Full Report →