N7094J

Airworthiness Directives; Robinson Helicopter Company Model (Robinson) R22, R22 Alpha, R22 Beta, R22 Mariner, R44, and R44 II Helicopters

This amendment supersedes an existing airworthiness directive (AD) for the specified Robinson model helicopters that currently requires a visual inspection for skin separation along the leading edge of blade skin aft of the skin-to-spar bond line on the lower surface of each main rotor blade (blade) and in the tip cap area. The existing AD also requires a "tap test" for detecting a separation or void in both bonded areas and repainting any exposed area of the blades. If any separation or void is detected, the AD requires, before further flight, replacing the blade. Thereafter, before each flight, the existing AD also requires checking for any exposed (bare) metal along the skin-to- spar bond line on the lower surface of each blade near the tip. If any bare metal is found, that AD requires an inspection by a qualified mechanic. This amendment contains the same requirements but expands the applicability to include all serial-numbered model helicopters and limits the applicability to specific blade part numbers. This amendment also requires a repetitive inspection of the blade and any necessary rework. This amendment is prompted by a fatal accident in Israel. We have also included responses to comments objecting to the recording requirements in the current AD relating to the pilot checks before each flight and to comments that the burden of the before-each-flight pilot check exceeds the benefit. We have concluded that a check before the first flight of each day is sufficient for aviation safety. The actions specified by this AD are intended to provide more specific AD actions, to relieve the burdens associated with the before-each-flight check by changing it to a daily check, to detect blade skin debond, and to prevent blade failure and subsequent loss of control of the helicopter.